CNC Glass Engraving Machine is the new equipment for glass deep processing equipment ， designed by several senior engineers together. It adopts CNC assisted design system.This equip-ment adopts high qualified bau screw,and slide track. It is used widly to cutting, graving, andpolishing of glass and mirror,all the processes from designing to processing arecontrolled by
Computer. It has many characteristics, including stable system, quick processing speed, low cost and so on. Advantages ：
• Quick production speed. The max.speed of X axis is 60m/min,as well as the same equipment of Europe.2 、 Particular Simulating function in the worldwide makes users very clear of the prodnction pattern, and decreases the mistalce rate.3 、 Long using-rate of grind-wheel:grinding-wheel can be used from Φ 120to Φ 110. Which is two times of the same product in domestic, This decreases user ′ s cost a lot.4 、 Use chinese & English Desk which is convenient communicating between human and machine, and easy for operatir.5 、 Add in-compression & deeompression function,which makes polish effect much better and increases up-to-standard rato.
|
| Model |
LDKE3016 |
| Table Size(mm) |
3000
×1600 |
| Stroke of X,Y,Zaxia(mm) |
3300
×1700
×150 |
| Swivel angle of C zxis |
0-360 |
| Allocating Accuracy(X,Y,Z) |
0.01×0.02×0.01 |
| Allocating Accuracy(Caxis) |
5" |
| Repeatability(mm) |
0.005×0.01×0.005 |
| C axis |
2" |
| Velocity(X,Y axis)(m/min) |
60 |
| Z axis(m/min) |
30 |
| Tools Capacity |
10pieces |
| Main Shaft Spinning Speed(rpm) |
0-6000 |
| CNC System |
Panasonic |
| Main Spindle Power(KW) |
4 |
| Max Width of Shot (mm) |
30 |
| Glass Thickness(mm) |
3-30 |
| Max.Diameter of Blade(mm) |
170 |
| Total Power Connected(kw) |
21 |
|
CNC Glass Engraving Machine
